We are hoisting telecommunications equipment in the Sun City – El Paso, Texas, with our Liebherr 1090/2 [110 ton] crane. The building is the Corrado Towers, and client was Casson-Mark. The telecommunications equipments weighed 4,000 lbs. […]
We are hoisting a 992G Loader for Swift Corp. The crane we used is the Terex AC350-6 a 400 ton all-terrain crane. […]
Shown here we have our Manitex 2592 25 ton boomtruck crane, National 9103A 26 ton boomtruck crane and the Linkbelt HTC8675 75 ton crane hoisting a section of 250′ long 6″ steel pipe. This is a project for Sunland Construction who are working for Kinder Morgan. First they bored a horizontal hole under the full […]
Setting 14,000 lb chiller units inside of hanger. Project Challenges: This project was done inside of the hanger and only had 45 feet of head room and other crafts working in area. Rigging was a problem using a spreader bar and still keeping the proper angle of the rigging. Once units were loaded onto second […]
The LTM 1200/1 with 197 ft main boom and 118 ft jib being used to for moving equipment inside a building. […]
Crane Service, Inc. has been doing business with Sandia National Laboratories and Los Alamos National Laboratories ever since we opened our doors in 1960. Our work on these sites range in setting air conditioning units to placing a mirror for a large telescope. […]
We are setting RTU’s [roof top units] for AM Refrigeration at the new Sam’s Club in El Paso, Texas. We are using the Terex AC350/6 [400 ton] crane with 200 feet of boom and 165,000 lbs of counterweight. The RTU’s weighed in at 9,000 lbs. […]
The LTM 1200/1 setting bridge beams at the Red River Ski Lodge. […]
Shown is the Terex AC100-4L, a 120-ton class all-terrain crane. The AC100-4L is hoisting heater components that weigh 21,000 lbs. […]
Hoist DSTATCOM Building over perimeter fence and set at final point. Project Challenges: Offset center of gravity. […]