The Link-Belt HTC8675 a 75 ton hydraulic truck crane is hoisting a compressor for Exterran in Farmington, New Mexico. […]
EXTERRAN COMPRESSOR
Category: OIL AND GAS
ELKHORN COMPRESSOR
We are hoisting a compressor skid that weighed 115,000 lbs. We used the Link-Belt ATC 3275 [275 ton] crane to complete the project for Elkhorn. […]
EL PASO PUMPING STATION PROJECT
We unloaded a gas turbine and set it aside until proper skid arrived. Meanwhile, we moved several gas turbines via the jack and role method around inside the warehouse to better accommodate any incoming gas turbines. Once the proper skid came in, we picked the gas turbine we set aside earlier and connected the two. […]
DU PONT PROJECT EL PASO
The Link-Belt HTC86100 100 ton hydraulic truck crane is working at the Du Pont plant in El Paso, Texas. […]
COMPRESSORS
Managed by our Bloomfield office, we are routinely changing out compressors and other varying components around the four corner’s oilfields. […]
COMPRESSOR SKID LIFT
This project was to lift a 140k compressor skid with a challenging center of gravity. We used the Linkbelt HTC8600, Tadano AC110-G, Linkbelt ATC3200 & Linkbelt ATC3275. The concern was that over 65% of the load was to left side of the skid and was top heavy to that side. We lifted the skid and […]
CCI COMPRESSOR LIFT
The Link-Belt ATC3210 a 210 ton all-terrain crane is working on dressing out a compressor that is shown here. Before the ATC3210 was on site we hoisted the 180,000 lb compressor with our Terex AC250-1 a 300 ton all-terrain crane and the Link-Belt ATC3210 a 210 ton all-terrain crane. This project was for CCI in […]
ALON USA
Alon USA required the use of nine separate cranes working around the clock. […]