Set Bridge Beams (Type 4 120ft long) over the Concho River. Project Equipment: Link-Belt ATC3200 truck,Tadano ATF220G-5 truck Project Challenges: Multiple set ups in tight areas, congested work areas, rugged terrain, a lot of personnel on and around jobsite, beams exceeding 100,000 lbs, critical set ups to allow trucks to pass. […]
Set Bridge Beams over RR Tracks Project Equipment: American 8460 truck, Link-Belt ATC3200 truck. Project Challenges: Multiple set ups, RR Traffic, Congested intersection with vehicle traffic, Long hours. […]
The Grove GMK6400 all-terrain 450 ton crane is hoisting 70,000lb bridge girders for Sundt. The bridge beams were 90 feet in length at a 80 foot radius. This project took place in Big Spring, Texas with our crane. […]
The beams are the 55,000 lb beams leading from the highway on to the Schuster Road entrance in El Paso, Texas. We are using our Link-Belt 248H crane and our Kobelco CK 1600 II crane. […]
We are hoisting bridge beam sections for the Paseo Del Norte bridge flyover in Albuquerque, New Mexico. The crane we used is the Grove GMK-7550. […]
A pair of Link-Belt ATC3275’s, 275-ton all-terrain cranes are shown hoisting bridge girders. The two cranes were hoisting bridge girders. The girders were 83 ft long and weighed 96,000 lbs. A project challenge was the weather. There were a few days of heavy rain that hindered the project because the trucks hauling the girders had […]
Twin Mountain Construction required heavy lift cranes for the placement of bridge beams at the Interstate 40 and Coors blvd. interchange. Working at night the Liebherr LTM1160 truck, Liebherr LTM1200 truc, American 8460 truck, and Link-Belt HC268 truck were all used for the project. […]
The Terex AC350/6, a 400 ton all-terrain crane is hoisting concrete bridge girders for Haydon Building Corp. The bridge beams weighed 115,000lb. We used two cranes to make the lift. This crane rental project is for the LP375/I10 interchange in El Paso, Texas. […]
The Terex AC350/6, a 400 ton all-terrain crane and the Kobelco CK1600II, a 160 ton crawler crane are hoisting concrete bridge girders for Haydon Building Corp in El Paso, Texas. The bridge beams weighed 160,000lb. We used two cranes to make the lift. […]
We are hoisting bridge beams in El Paso, Texas for Haydon. The cranes on the bridge construction jobsite are the P&H 5100 100 ton crawler crane and the Terex AC350/6 300 ton all-terrain crane. […]